Lincoln Electric K1780-1 Manuel d'utilisateur télécharger pdf (Page 14)

A-7

INSTALLATION

POWER FEED 10 / R

A-7

GUN RECEIVER BUSHINGS AND

ADAPTERS

The Power Feed wire feeders are equipped with facto-

ry installed K1500-2 gun connection kits. These kits

are for guns having a Tweco #2-#4 type connector.

The Power Feed 10/R has been designed to make

connecting a variety of guns easy and inexpensive

with the K1500 series of gun connection kits.

Non-Lincoln Guns

Most competitive guns can be connected to the Power

Feed 10/R by using one of the K1500 series adapter

kits, See “Gun Adapters” in ACCESSORIES section.

K489-7 (Dual Schedule Fast-Mate Adapter)

This adapter installs directly into the wire drive feed-

plate, to provide for use of guns with Fast-Mate or

European style gun connections. This K489-7 will

handle both standard Fast-Mate and Dual Schedule

Fast-Mate guns.

K1500-1 (Lincoln Innershield gun standard connec-

tion)

Use this kit to connect the following guns: Guns hav-

ing a Lincoln standard innershield gun connector,

Magnum 200/300/400 with K466-1 connector kit, and

Magnum 550 guns with the K613-1 gun connection

kit.

K1500-2 (Tweco #2-#4 type connection)

The K1500-2 gun adapter comes factory installed on

the Power Feed 10/R wire feeder. Use this adapter for

guns that have a Tweco #2-#4 connector. Such guns

include Magnum 200/300/400 guns with K466-2 con-

nector kit, and completely factory assembled Magnum

guns that are factory equipped with the K466-2 con-

nector (such as the K471-21, -22, and -23 dedicated

Magnum 400 guns and the K497-20 and -21 Magnum

200 guns).

K1500-3 (Tweco #5 connection)

For Magnum 550 gun with K613-2 Connection Kit,

and any other gun having a Tweco #5 connector .

K1500-4 (Miller connection)

For any gun having a newer style Miller connector.

Install gun adapters per the instructions shipped with it.

K1500-5 (Oxo connection)

For any gun having an Oxo style threaded connector.

Install gun adapter per the instructions shipped with it.

CONDUIT ADAPTERS

The K1546-1 and K1546-2 Adapter for use with

Lincoln Magnum conduit (K515 or 565) and E-Beam

conduit. The K1546-1 is to be used for wire sizes

(.023 - 1/16), K1546-2 is to be used for wire sizes

(1/16 - .120)

For Magnum conduit:

Install the K1546-1 or K1546-2 adapter at the incom-

ing end of the feed plate, secure with the set screw

located at the back of the feed plate. If a brass fitting

is supplied with the conduit, remove it from the feeder

end of the conduit by unscrewing it. Insert the conduit

into the K1546-1 or K1546-2, secure the conduit by

fastening it the adapter with the supplied knob screw.

For E-Beam Conduit:

Install the K1546-2 gun adapter at the incoming end of

the feed plate, secure with the set screw located at

the back of the feed plate. Insert the conduit into the

K1546-2, secure the conduit by fastening it the

adapter with the supplied knob screw.

REMOTE SENSE LEAD SPECIFICATIONS

The Power Feed10/R should always be operated with

the voltage sense lead (67) attached to the feed plate.

INSTALLATION OF FIELD INSTALLED

OPTIONS

Water Flow Sensor

Water cooled guns can be damaged very quickly if

they are used even momentarily without water flowing.

Recommend practice is to install a water flow sensor

on the water return line of the torch. When fully inte-

grated into the welding system, the sensor will prevent

welding if no water flow is present.

Gas Guard Regulator

The Gas Guard regulator is available as an optional

accessory (K659-1) for Power Feed Robotic wire drive

unit. Install the 5/8-18 male outlet of the regulator to

the proper 5/8-18 female gas inlet on the back panel

of the wire drive. Secure fitting with flow adjuster key

at top.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Lincoln Electric K1780-1 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Lincoln Electric K1780-1