Lincoln Electric 45KPOP Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Système de soudage Lincoln Electric 45KPOP. Lincoln Electric 45KPOP Use and Care Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
MATERIAL SAFETY DATA SHEET
Prepared to U.S. OSHA, CMA, ANSI and Canadian WHMIS Standards .This Material Safety Data Sheet is offered pursuant to OSHA’s Hazard
Communication Standard (29 CFR 1910.1200). Other government regulations must be reviewed for applicability to these products.
WARNING: PRODUCT COMPONENTS PRESENT HEALTH AND SAFETY HAZARDS. READ AND UNDERSTAND THIS MATERIAL SAFETY DATA
SHEET (M.S.DS.). ALSO, FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES. This product may contain Chromium and/or Nickel which are listed
by OSHA, NTP, or IARC as being a carcinogen or potential carcinogen. Use of this product may expose you or others to fumes and gases at levels
exceeding those established by the American Conference of Governmental Industrial Hygienists (ACGIH) or the Occupational Safety and Health
Administration (OSHA) The information contained herein relates only to the specific product. If the product is combined with other materials, all
component properties must be considered. BE SURE TO CONSULT THE LATEST VERSION OF THE MSDS. MATERIAL SAFETY DATA SHEETS ARE
AVAILABLE FROM HARRIS PRODUCTS GROUP salesinfo@jwharris.com
513-754-2000 www.harrisproductsgroup.com
STATEMENT OF LIABILITY-DISCLAIMER
To the best of the Harris Products Group knowledge, the information and recommendations contained in this publication are reliable and accurate as of the
date prepared. However, accuracy, suitability, or completeness are not guaranteed, and no warranty, guarantee, or representation, expressed or implied,
is made by Harris Products Group as to the absolute correctness or sufficiency of any representation contained in this and other publications; Harris
Products Group. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and
other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances . Data may be
changed from time to time.
PART I What is the material and what do I need to know in an emergency?
1. PRODUCT IDENTIFICATION
TRADE NAME (AS LABELED): HIGH SILVER BRAZING ALLOYS
(Bare & Flux-Coated Wire or Rods)
CHEMICAL NAME/CLASS: Metal Alloy
SYNONYMS: Not Applicable
PRODUCT USE: Metal Brazing
DOCUMENT NUMBER: 0127
SUPPLIER/MANUFACTURER'S NAME: HARRIS Products Group
ADDRESS: 4501 Quality Place, Mason, Ohio 45040
EMERGENCY PHONE: CHEMTREC: 1-800-424-9300
BUSINESS PHONE: 513-754-2000 FAX 513-754-8778
DATE OF PREPARATION: July 30, 2010
Effective Date: November 11, 2004
2. NOMINAL COMPOSITION and INFORMATION ON INGREDIENTS
PRODUCT NAME Ag Cu Zn Ni Sn Other
SAFETY-SILV
25
25 43 30 2
SAFETY-SILV
30
30 38 32
SAFETY-SILV
35
35 32 33
SAFETY-SILV
38T
38 32 28 2
SAFETY-SILV
40
40 30.5 29.5
SAFETY-SILV
40 Ni2
40 30 28 2
SAFETY-SILV
40 Ni5
40 30 25 5
SAFETY-SILV
40T
40 30 28 2
SAFETY-SILV
45
45 30 25
SAFETY-SILV
45T
45 27 25 3
SAFETY-SILV
50
50 34 16
SAFETY-SILV
50N
50 20 28 2
SAFETY-SILV
54
54 40 5 1
SAFETY-SILV
56
56 22 17 5
SAFETY-SILV
58
57.5 32.5 7 3 Mn
SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS)
PAGE 1 OF 12
Vue de la page 0
1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Prepared to

Page 2 - PAGE 2 OF 12

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 10 OF 12 13. DISPOSAL CONSIDERATIONS PREPARING WASTES FOR DISPOSAL: Waste

Page 3 - 3. HAZARD IDENTIFICATION

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 11 OF 12 15. REGULATORY INFORMATION (Continued) CALIFORNIA PROPOSITION 65:

Page 4 - REACTIVITY

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 12 OF 12 DEFINITIONS OF TERMS A large number of abbreviations and acronyms a

Page 5 - 5. FIRE-FIGHTING MEASURES

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 2 OF 12 SAFETY-SILV 60 60 25 15 SAFETY-SILV 60T 60 30 10 SAFETY-SI

Page 6 - 7. HANDLING and STORAGE

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 3 OF 12 2. NOMINAL COMPOSITION and INFORMATION ON INGREDIENTS (Continued) C

Page 7

3. HAZARD IDENTIFICATION (Continued) CONTACT WITH SKIN or EYES: Contact of the rod form of these products with the skin is not anticipated to be ir

Page 8 - 10. STABILITY and REACTIVITY

3. HAZARD IDENTIFICATION (Continued) CHRONIC: Chronic skin over-exposure to the fumes of these products during brazing operations may produce dermat

Page 9 - 12. ECOLOGICAL INFORMATION

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 6 OF 12 6. ACCIDENTAL RELEASE MEASURES SPILL AND LEAK RESPONSE: Not appli

Page 10 - 15. REGULATORY INFORMATION

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 7 OF 12 8. EXPOSURE CONTROLS - PERSONAL PROTECTION (Continued) RESPIRATORY P

Page 11 - 16. OTHER INFORMATION

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 8 OF 12 9. PHYSICAL and CHEMICAL PROPERTIES (Continued) The following infor

Page 12 - DEFINITIONS OF TERMS

SILVER BRAZING ALLOYS (BARE & FLUX-COATED WIRE or RODS) PAGE 9 OF 12 11. TOXICOLOGICAL INFORMATION (Continued) REPRODUCTIVE TOXICITY INFO

Commentaires sur ces manuels

Pas de commentaire