Lincoln Electric RANGER IM612 Manuel d'utilisateur télécharger pdf (Page 24)

B-9

OPERATION

B-9

RANGER 8+ DIESEL

AUXILIARY POWER

The RANGER 8+ DIESEL can provide up to 9,000

watts of 115/230 volts AC, Single phase 60 HZ power

for continuous use. The front of the machine includes

three receptacles for connecting AC power Plugs, one

50 amp 115/230 volt NEMA 14-50R receptacle and

two 15 amp 115 volt NEMA 5-15R receptacles. Do

not connect any plugs that connect to the power

receptacles in parallel.

Start the engine and set the "IDLER" control switch to

the desired operating mode. Set the "CONTROL" to

10. Voltage is now correct at the receptacles for auxil-

iary power.

Most 1.5 hp AC single phase motors can be started if

there is no load on the motor or other load connected

to the machine. Larger motors through 2 hp can be

run provided the receptacle rating as previously stated

is not exceeded. This may necessitate 230 volt oper-

ation only.

SIMULTANEOUS WELDING AND POWER

LOADS

Auxiliary power ratings are with no welding load.

Simultaneous welding and power loads are permitted

by the following table. The permissible currents

shown assume that current is being drawn from either

the 115 volt or 230 volt supply (not both at the same

time).

Output

Selector

Setting

Welding

Output

Amps

Permissible

Power Watts

(Unity Power

Factor)

Permissible

Auxiliary Current in

Amperes @ 115V

Permissible

Auxiliary Current

in Amperes @

230V

NONE

2100

3800

5000

5600

6300

9000

225 DC / 250 AC

175

125

MAX

175

125

NO WELDING

RANGER 8+ DIESEL SIMULTANEOUS WELDING AND POWER LOADS

(OUTPUT CONTROL SET AT 10)

TABLE B.4

NOTE: Voltage and permissible watts decrease as "CONTROL" is adjusted to settings less than 10. It is recommended that

at settings less than 10, only incandescent lighting loads be connected to the auxiliary power receptacles.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Lincoln Electric RANGER IM612 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Lincoln Electric RANGER IM612